WQ Series High-lift Electric Submersible Waste Pump HYDDBY06

$100.00 ~ $150.00
Sn:
20190302073028291
Quantity:
- +
piece
About the product

Product overview

The WQ series high-lift electric submersible waste pump is manufactured as per GB/T 24674-2009 Waste submersible motor-pumps. It is of a lower pump structure, with two sets of independent bulk mechanical seals, a wear-resistant silicon carbide grinding block, a stainless steel rotating shaft, standard stainless steel exposed parts and 10 m long cables. The outlet is provided with the pipe connector for the purpose of flexible pipe connection mainly in the mobile installation condition. The pump is installed with a multi-stage centrifugal impeller, and some may be configured with a built-in motor.

Product use

It is mainly applicable to pumping and discharge of sewage from industrial and mining enterprises, discharge of muddy water on the civil engineering sites, water supply, discharge and sprinkling irrigation for small farmland and gardens and urban sanitation sewage treatment.

Operating conditions:

1 The flow at the outlet of the electric pump shall not be greater than the rated value (i.e. the pump shall be used within the specified lift range);

2 The submergence depth shall not exceed 5 m, otherwise, it shall be stated when the order is placed;

3 The water temperature shall not exceed + 40 °C;

4 The pH valve shall be 5 ~ 9;

5 Rated voltage: 380 V or 660 V, with a permissible fluctuation of ± 10%; frequency: 50 Hz;

6 Volume ratio of solid-phase matters in the fluid: < 2%, kinematic viscosity: 7×10-7 ~ 23×10-6 m2/s, max. density: 1.2 × 103 kg/m3.

6-1.jpg